Report

[Laser cut and engrave] Essential Oils Diffuser Tray — Project made with xTool D1 machine for Laser cut and engrave.

Essential Oils Diffuser Tray

Instruction

essential oil tray

.xcs

Application scenario

Laser

Machine & module

xTool D1

Compatible xTool Machine

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

1356

Information

      Many enjoy an essential oils diffuser, but with the diffuser, and various oils, it might be a little bit of clutter to keep all the items together.  This small tray may help keep everything together and organize.

30creatorschallenge

Instruction

Step1: Gather measurements

You may need to modify this project for your own diffuser. Mine is 5 inches in diameter, so we will use this for the inside measurement of the first compartment of our tray. I also figured that a 2 inch compartment would be sufficient to store accessories and bottles of oil.

Step2: Design the Box

Preview

Let's start at the boxes.py site to use the tray template

Boxes - DividerTray (boringplace.org)

In the image i have listed the settings, but you may need to adjust for your application.

Step3: Layout

Preview

On this project, I have set up the parts of the box on two canvases. I am doing this because the material I have is 12x12 inches. Keep this in mind as you set up for your material and laser.

Remember to not adjust the size of the box once it is in XCS as this may cause the finger joints to not fit.

Step4: Settings

All operations on this project are cut operations. The settings are for the D1 5W laser. You may need to adjust the settings for your laser configuration.

Be sure to follow all the safety guidelines for your laser and always wear personal protective equipment when the laser is in operation.

Comments