Report

Laser Cut Highland Cow Christmas Earrings with Santa Hats

Instruction

laser cut

.xcs

Show 5 more

Application scenario

Laser processing

Machine & module

xTool S1

20W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

259

2434

Information

       Laser Cut  Earrings. Christmas Laser cut.

Recommended material - Plywood, MDF, Acrylic, Plexiglas, Metal, Cardboard, Paper.

You can increase the size of a design. But when reducing the design, consider thin elements.



Recommended Material Thickness for Wood - 3 - 6 mm (1 / 12in - 1 / 4in).



This ZIP archive contains:

file in SVG format

file in PNG format

file in DXF format

file in PDF format

file in EPS format

file in XCS format



Please, feel free contact me, if you have any questions.



Thank you for shopping!

Instruction

Step1: Tools and working place

Preview

1.Open File

2. Position your chosen material on the lazerbed.

3. Move the image in the CreativeSpace so you can align your lazer with the material so as to avoid material wastage.

4. Set the correct processing parameters for your material, check it's set to output and cutting.

5. Select the Red Layer (the cutting)
Set the Power 100
Set Speed 6 
Set Number of passes 1

Step2: Right colors and painting

1. Make sure to rub any edges to remove smoke marks and ash from the Lazer cutting process.

2.Varnish them. Any remaining smokey residue will be set into the varnish.Make sure you varnish the edges where there is the most smoke residue to seal them up.

3.If your wood comes pre-varnished, still do this step of prep and varnish, except instead of varnishing the top and back of your cut parts, avoid the already varnished surface and varnish the lazercut edges along the side to stop that smokey residue marking hands.

You can use any material with a thickness of 3 mm. or less.

4. Use your favorite color to paint with Acrylic Marker.

So, it is ready!

Comments