Сообщить
![[Laser cut and engrave] Happy Easter Sign with Bunny and Easter Eggs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f8636a68-13c8-4a81-bac7-1777f520d315?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Easter Sign
Инструкция
EasterSign
.xcs
Сценарий применения
Laser processing
Машина и модуль
xTool S1
40WСовместимые · 13
Аксессуары
xTool S1 Honeycomb Panel
xTool Smoke Purifier
xTool 6-inch 410 CFM Inline Duct Fan
Используемый материал
1/8"(3mm) Basswood Plywood
9
399
Инструкция
1
Шаг1
Предварительный просмотр
Предварительный просмотр
First Cut all the pieces. I cut them in sections since my machine wasn't big enough. If you also have to do this make sure you write down how large your circle is so that your next circle will be the same size. For example, my circles I made sure were the same using the w and h coordinates. My W was 11.549 and H was the same number.
2
Шаг2
Предварительный просмотр
Once everything is cut its time to paint. For this I chose pastel colors like pink, baby blue, yellow, green, and purple. Also paint the bunny I chose brown.
3
Шаг3
Предварительный просмотр
After everything is painted and dried its time to glue. For this I like to use gorilla wood glue. I let it sit over night to dry then its all done!
Комментарии
