Vickielayn

Report

[Laser cut and engrave] Maryland license plate Faux leather patch — Project made with xTool F1 machine for Laser cut and engrave.

Maryland license plate Faux leather patch

Instruction

MDLicensePlate

.xcs

Application scenario

Laser processing (1min)

Machine & module

xTool F1

2W, 10W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

5W, 15W

5W, 80W

F2 Ultra

40W, 60W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

F2 Ultra (Single)

60W

Material used

Brown to Silver Laserable PU Leather

1329

Information

      Maryland, show off with a personalized faux leather patch. Add to your hats, jackets, backpacks. Your imagination is your only limit.

This design requires additional fonts to be installed. Please see Instructions.

Instruction

Step1: Prepare the patch

Prepare the patch by ensuring it is free of debris. Wipe it down with a damp (not wet) towel and allow to dry completely. Isopropyl alcohol can also be used, as it will dry quickly.

Place the prepared patch on the center of your laser bed.

Step2: Customize the XCS file

Download the font: License Plate USA from https://www.dafont.com/license-plate-usa.font

Download the font: Garamond from https://fontsgeek.com/fonts/garamond

Open the file in XCS.

Customize the text to fit the size and shape of your patch.

Step3: Process the XCS file

Select Framing to ensure fit and positioning.

Select Process. The patch should finish in less than 2 minutes.

Step4: Cleaning

Using a damp (not wet) cloth, wipe any char present from the patch.

Step5: Apply the patch

Be sure to follow the manufacturer's heating directions for applying the patch.

Heat press: Preheat the heat press to 360 degrees F. place the path on the desired location. Cover with a sheet of parchment paper. Press for 20 seconds.

Household Iron: Set iron to Cotton. Do not apply steam! Cover with a sheet of parchment paper. Press for 30 seconds.

Comments