Bolas nieve personalizadas

To design these balls, you just have to follow the following steps:

• First we will insert a 90 mm circle, insert a small rectangle at the top, place it centered and select both shapes and combine and join. Then we insert a 16 mm circle and an 8 mm circle, center them both, select both and click on combine and subtract in superposition. We place it at the top of the rectangle, select both shapes and click on combine and join. We have already made the base. 
• We insert an 84 mm circle and center it in the previous shape. Select both shapes and click on combine and subtract in superimposition. We make several copies. 
• Then we just have to play with the different shapes of snowflakes that we like. We inserted several, adjusted their size and attached them in space. Select both shapes and click on combine and join. 
• Finally, we will add the names with the typography that we like the most. In this case I have used the "bambino" typeface. We adapt the size to the size of the ball and put it separately to cut. 

We turn on our Xtool and place the material we want to work with, check the parameters and hit start. 

We let the machine do its job. 

Once we have our balls and the names, we will only have to paste the names on the design and in the position that we like the most. 

To finish, we just have to place a ribbon or string that we like and we have our balls ready.