Reportar
![[Laser cut and engrave] Storage Rack](https://image-res.xtool.com/ali-res/community/making/5b2b9b3c-2e7b-4247-8c61-39fdaae8aa62.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Storage Rack
Instrucción
seasoning rack
.xcs
Escenario de aplicación
Láser
Máquina y módulo
xTool F1
Material utilizado
Wood
104
2411
Instrucción
1
Paso1
Vista previa
Vista previa
Vista previa
2 More images
Begin by importing the design file into the XCS software. The file consists of 5 canvases, each representing different parts of the basswood storage rack. Place the wood boards in order, click auto-measure, fine-tune the settings as needed, and click process to frame the cutting range. When completed, start cutting.
2
Paso2
Vista previa
Cut all components and move on to the next step.
3
Paso3
Vista previa
Install the baseboard and the side boards.
4
Paso4
Vista previa
Complete the assembly by installing the front and back side boards on the upper and lower layers. Your project is now complete.
After completing the assembly, it is recommended to reinforce the joints with woodworking glue for enhanced strength.
When working with F1, choose blue light as the light source.
Comentarios
