Report

[Laser cut and engrave] Hockey Stick Dangle Earrings — Project made with F2 Ultra UV machine for Laser cut and engrave.

Hockey Stick Dangle Earrings

Instruction

hockey stick earring

.xs

Application scenario

Laser processing

Machine & module

xTool F2 Ultra UV

Compatible xTool Machine

F2 Ultra（Single）

F2 Ultra

F1 Ultra

F1 Lite

P2S

M1 Ultra

D1 Pro 2.0

D1 Pro

Laserbox

Material used

1/8"(3mm) Birch Plywood

438

Information

      We cut and engraved these earrings out of 3mm birch plywood, then hand-painted with acrylic paint markers and finished them with a thin layer of epoxy on both sides.

We truly appreciate all the likes, downloads, comments, and support — it means a lot! Be sure to check out our other work, and feel free to give us a follow if you enjoy what we create. We aim to post a wide variety of content and are happy to answer any questions you might have. We're here to help in any way we can!

hockey stick earrings

Instruction

Step1

Before cutting, make sure to lightly sand the plywood for a smoother feel/finish. If desired, you can also paint the wood with your color of choice. We used a white acrylic paint pen to accent the “tape” on the top and bottom of the hockey stick.

Comments