Report

[Laser cut and engrave] Yellow Acrylic Lemon Slice Earrings Handmade Jewelry Making — Project made with xTool F1 machine for Laser cut and engrave.

Yellow Acrylic Lemon Slice Earrings Handmade Jewelry Making

Instruction

lemon slice earrings

.xcs

Application scenario

Laser (5min)

Machine & module

xTool F1

Material used

3mm Black Acrylic (for Slide Extension)

1968

Information

      You know what they say, if life gives you lemons make acrylic earrings! :) With this acrylic project you will learn how to make acrylic earrings with your xTool laser.

Instruction

Step1: What you will need

For this project you will need yellow acrylic 3mm wide or any other acrylic colour you will like to choose as well as earrings hooks for jewellery making.

Step2: Instructions

Just place your acrylic on your laser bed. I would recommend to lift your acrylic with little magnets or 4 pieces of acrylic so that the laser beam can breath and the acrylic does not get stuck to the laser bed. It is also very important to focus the laser properly to avoid any flames or burnt marks.

Cut your acrylic with these settings: Power: 100% Speed: 3 I recommend 3 or four passes.