Report

[Laser cut and engrave] Acrylic Cookie Stamps for Bakery Cupcakes — Project made with xTool F1 machine for Laser cut and engrave.

Acrylic Cookie Stamps for Bakery Cupcakes

Instruction

Cookie settings

.xcs

Application scenario

Laser (3min)

Machine & module

xTool F1

Material used

3mm Black Acrylic (for Slide Extension)

154

3381

Information

      With this project you will be able to make acrylic cookie stamps for your bakery or cupcakes. This is the perfect laser project idea to start your little business.

Instruction

Step1: What you will need

Preview

For this project you will need red acrylic 3mm wide or any other acrylic colour you will like to choose.

Step2: Instructions

Just place your acrylic on your laser bed. I would recommend to lift your acrylic with little magnets or 4 pieces of acrylic so that the laser beam can breath and the acrylic does not get stuck to the laser bed. It is also very important to focus the laser properly to avoid any flames or burnt marks.

Cut your acrylic with these settings: Power: 100% Speed: 40 I recommend 1 or 2 passes.