Herb THE berT

Poročilo

[Laser cut and engrave] BBQ Tray — Project made with xTool D1 Pro machine for Laser cut and engrave.

BBQ Tray

Navodilo

BBQ tray

.xcs

Scenarij uporabe

Laser (60min)

Stroj in modul

xTool D1 Pro

20W

Združljive · 13

Uporabljeni material

1/8"(3mm) Birch Plywood

237

2054

Informacije

      My Summer project and gift in one :)
i created the basic box in makercase.com and designed the inner parts myself
this time i also created everything in my latest achievement Affinity Designer as a practice project 
i left the name part in the XCS file editable

Navodilo

Korak1: Box creating

BBQ Tray instruction: step 1 - Box creating

Predogled

the box created in makercase
the inner in illustrator
created the simple basic shapes for this
it is important to pay attention to the width
take an outer wall and subtract the thickness from the wood - here it is 3mm
both inner parts also need slots so that you can slide them together
the thickness of the slit is again the thickness of the wood
the length of the slits must also be half the height of the smaller area

Translated with DeepL.com (free version)

Korak2: BBQ Sign

Predogled

2 More images

first create 2 circles
one thick and one thin
put the grid inside the thin circle
to do this, lay several lines over and under each other
remove the protrusions from the smaller ring

then the flames
I created these with the pentool
here you have to take your time to adjust the tips and the shape
for me at least it looked very strange for a long time

at the bottom a rectangle with 2 small holes

then it goes into the XCS and everything to the laser