Report
![[Laser cut and engrave] International Morse Code Reference Guide Sheet](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/0cfb6d65-d0c1-46e3-b226-c108b408e78b.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
International Morse Code Reference Guide Sheet
Instruction
Morse Code Card
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatible xTool Machine
M2
10W, 20WF2 Ultra UV
5WF2
15WP3
80WF2 Ultra
40WF1 Ultra
20WM1
5W, 10WD1
5W, 10W, 20WD1 Pro
5W, 10W, 20W, 40WP2
55WF1
10WS1
10W, 20WM1 Ultra
10W, 20WP2S
55WMaterial used
1/8"(3mm) Basswood Plywood
7
313
Instruction
1
Step1
Preview
Wikimedia Commons is a great source of reference for educational images and information. I obtained an SVG image, which I ungrouped to allow me to lay it out correctly for my design.
After that I engraved and cut out the pieces (I was able to fit four copies onto an A3 piece of 3mm plywood) , sprayed them with a coat of clearcoat and added a ring.
Easy to do and flies of the stand
Comments
