1/8"(3mm,Ga.11) ASTM-1095 Carbon Steel
This is a shotgun choke tube engraved for a duck hunter
MachineS1(Fiber IR · 2W)
Processing ModeLASER_CYLINDER_CATCH
Processing typeEngrave
Thickness3mm
SettingsVersion: 2.0.0
0
Precautions
Wear goggles that match the wavelength of the light sourceWhen operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
Prevent high-temperature burns after processingFreshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.
Did these settings work?No results yet
No one has shared a result yet. Be the first to let other makers know if these settings worked.
Similar Materials
3mm
1/8"(3mm,Ga.11) ASTM-1095 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings1
xTool-tested
3mm
1/8"(3mm,Ga.11) ASTM-A36 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings2
xTool-tested
3mm
1/8"(3mm,Ga.11) ASTM-1095 Carbon Steel
MachinesF2 Ultra (Fiber IR 60W)
ModeProcess on flat surface
TypeEngrave
4
3mm
1/8"(3mm,Ga.11) #45 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings1
xTool-tested
1mm
3/64"(1mm,Ga.19) ASTM-1095 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings3
xTool-tested
2mm
5/64"(2mm,Ga.14) ASTM-1095 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings1
xTool-tested
4mm
5/32"(4mm,Ga.9) ASTM-1095 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings1
xTool-tested
5mm
13/64"(5mm,Ga.6) ASTM-1095 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings1
xTool-tested
3mm
1/8"(3mm,Ga.11) 430 Stainless Steel
Machines
MetalFab CNC Cutter
Tested Settings10
xTool-tested
3mm
1/8"(3mm,Ga.11) 410 Stainless Steel
Machines
MetalFab CNC Cutter
Tested Settings10
xTool-tested
3mm
1/8"(3mm,Ga.11) 304 Stainless Steel
Machines
MetalFab CNC Cutter
Tested Settings14
xTool-tested
2mm
5/64"(2mm,Ga.14) ASTM-1095 Carbon Steel
MachinesMetalFab CNC Cutter
ModeCutting with fixture
TypeCut
2
5/64"(2mm,Ga.14) ASTM-1095 Carbon Steel
MachinesMetalFab CNC Cutter
ModeCutting with fixture
TypeCut
2
6mm
1/4"(6mm,GA.3) ASTM-A36 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings1
xTool-tested
1mm
3/64"(1mm,Ga.19) ASTM-A36 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings6
xTool-tested
0.5mm
1/32"(0.5mm,Ga.26) ASTM-A36 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings6
xTool-tested
4mm
5/32"(4mm,Ga.9) ASTM-A36 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings2
xTool-tested
5mm
13/64"(5mm,Ga.6) ASTM-A36 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings2
xTool-tested
2mm
5/64"(2mm,Ga.14) ASTM-A36 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings2
xTool-tested
12mm
1/2"(12mm) ASTM-A36 Carbon Steel
Machines
MetalFab CNC Cutter
Tested Settings1
xTool-tested