cwo.hobart

Brass metal casing

Due to the casing being thin this required 15 passes using IR to get a dark engraving

MachineF2(Fiber IR · 5W)

Processing ModeProcess on baseplate

Processing typeEngrave

Thickness1mm

Settings

Version: 2.0.0

Precautions

Wear goggles that match the wavelength of the light source

When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;

Prevent high-temperature burns after processing

Freshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.

🔔 Processing Tips

Materials need to be cleaned after processing

After engraving/cutting, dust and debris may remain on the surface; wipe with a soft cloth or clean water, and if necessary, use a neutral cleaner to significantly enhance the final product's appearance.

After embossing, the surface is polished

After the relief is completed, polish according to the instructions to enhance the sense of layering and surface texture.

Did these settings work?No results yet

No one has shared a result yet. Be the first to let other makers know if these settings worked.