Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Turtle Ornament
turtle ornament
.xcs
Application scenario
Laser (5min)
Machine & module
xTool S1
40W
Material used
3 mm Pine plywood
39
950
Information
I like turtles and there were not many options uploaded so I made some turtle ornaments. Also, I had some scrap wood lying around and thought this would be a good use.
![[Laser cut and engrave] Turtle Ornament](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/4807a858-ca55-4369-ac1f-396c90b9baf0?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Turtle Ornament](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Turtle Ornament](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/4807a858-ca55-4369-ac1f-396c90b9baf0?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Turtle Ornament](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/bfde7d4c-e07e-4593-913e-a51cf99bf3b6_IMG_20240114_211132831.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Turtle Ornament](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1289250c-3586-46b0-889e-bbee527d7856_IMG_20240114_211109430.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
