首页激光和刀切案例家居装饰盒子
Angellusss
Angellusss
举报
[Laser cut and engrave] Unfinished wooden box with open front
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Unfinished wooden box with open front
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Unfinished wooden box with open front
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Unfinished wooden box with open front
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Unfinished wooden box with open front
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Unfinished wooden box with open front
[Laser cut and engrave] Unfinished wooden box with open front
[Laser cut and engrave] Unfinished wooden box with open front
[Laser cut and engrave] Unfinished wooden box with open front
[Laser cut and engrave] Unfinished wooden box with open front
[Laser cut and engrave] Unfinished wooden box with open front
[Laser cut and engrave] Unfinished wooden box with open front
[Laser cut and engrave] Unfinished wooden box with open front

小箱体 48.7/30.7/30

教程
meulblefourgon.xcs
meulblefourgon
.xcs
应用场景
激光加工 (120min)
机器与模块
xTool S1
20W
使用的材料
多重复用3.6毫米
gift
19
956

信息

      小型机柜 48.7/30.7/30,3.6毫米胶合板
为Adria露营车制造的后座
顶部放Dolce Gusto，下面放烤面包机，我装了个汽水弹簧给水瓶加油，这是用Xtool S1做的最大家具。
家具
木箱
自己动手
可修改
范
甜美的味道
索达流
存储
适应性

教程

1

步骤1

小箱体 48.7/30.7/30 instruction: step 1 -
预览

 你好

，

下载家具文件

Worker xcs，开始切割第一部分，另一部分在这里的画布

上

，你想要更多搁板，选取三槽并添加，或者你想在两边

2

步骤2

小箱体 48.7/30.7/30 instruction: step 2 -
预览

选择画布2并剪下，擦拭边缘以免留下燃烧残留物

3

步骤3

小箱体 48.7/30.7/30 instruction: step 3 -
预览
剪掉上面那块

画布3

4

步骤4

小箱体 48.7/30.7/30 instruction: step 4 -
预览

剪下下一块画布，开始组装家具，并用木胶粘合

5

步骤5

小箱体 48.7/30.7/30 instruction: step 5 -
预览

剪下下一块画布，继续组装家具并粘合

6

步骤6

剪裁，倾斜，然后装上并粘合两个加固件，厚度1厘米，这样我就能到达顶板。

祝你有美好的一天

。
评论

二创

许可证

CC BY-NC