![[Laser cut and engrave] Gingerbread Man and House](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2Fc5c37ff6-bdba-47d8-9a46-16e581c688ed%2FPXL_20231207_225948911_edited_small.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Gingerbread Man and House](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2Fc5c37ff6-bdba-47d8-9a46-16e581c688ed%2FPXL_20231207_225948911_edited_small.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Gingerbread Man and House](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2F19d7a51e-aba0-4efb-b1b2-e67db4afcd5e%2FPXL_20231207_225948911_edited_small.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Gingerbread Man and House](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2F27090eb1-36f0-4246-b967-c98226c998f6%2FPXL_20231207_225943728_edited.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)


我有個想法想做一個薑餅屋,但後來想到,如果裡面有薑餅人的禮物盒會怎樣。
我跳到 https://www.festi.info/boxes.py 上,做了一個4x4英吋、高度2.5英吋的箱子。
薑餅人造型我用了 xTool Creative Space 裡的薑餅人形狀(點擊 Shape>Festival>在下方)。
我想加一些糖果,所以用了半圓形(點擊形狀>基本形狀>半圓形)。我在底部加了一個矩形,讓它穿過側邊。接著我加入了一些2.7毫米的方形來接受這些形狀。
我用長方形,圓圈居中放在被雪覆蓋的窗戶。拐杖糖使用一個矩形,條紋上加上45度長方形,並塗成紅白色。
我對這次的成果非常滿意。希望大家喜歡。我附上了我用來製作這個設計檔案的檔案。