Report
![[Laser cut and engrave] Personalized dreamcatcher with name Iris and hanging feathers](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/94de5fc5-6981-4e02-8d1e-f05bec2e0dd8?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Personalized dreamcatcher with name Iris and hanging feathers](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Personalized dreamcatcher with name Iris and hanging feathers](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/94de5fc5-6981-4e02-8d1e-f05bec2e0dd8?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Personalized dreamcatcher with name Iris and hanging feathers](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ffda04ca-fc5d-424f-91e6-e41c0befffbd.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Personalized dreamcatcher with name Iris and hanging feathers](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/6d24823d-af40-4e36-bb5e-c94a43de11b0.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Personalized dreamcatcher with name Iris and hanging feathers](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ed2fe66d-5bcd-44b7-8f1d-05ee528e7e01?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Capteur de reves
Instruction
CAPTEURDEREVESIRIS
.xcs
Show 10 more
Application scenario
Laser processing
Machine & module
xTool M1
10WMaterial used
Plywood 3.6mm
35
659
Information
For all the Irises! :)
Engraved and cut dream catcher with the Xtool M1.
The parameters are predefined for 3.6 mm plywood.
Instruction
1
Step1
A rather simple creation to make, it will just require a little patience. For the Xtool M1, the cutting will be done in several times because the dream catcher is quite large once finished.
Comments
