Segnala
![[Laser cut and engrave] Children's book page with dog and personalized bookmark](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/746854fc-b199-486e-b42c-e6742d0ec908.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Reading ruler
Istruzione
readingguide
.xcs
Scenario di applicazione
Laser processing
Macchina e modulo
xTool P2
55WCompatibili · 12
Materiale utilizzato
1/8"(3mm) Cherry Plywood
21
606
Informazione
Istruzione
1
Passo1: 1
To start perosnalise the ruler for the name needed.
If you want to change the image, you can do thjis at this stage as well.
2
Passo2
Ensure that the material is placed in the laser and use the camera to position the design
3
Passo3
Process the design.
4
Passo4
Once finished, remove form the laser and clean if needed. Paint to add extra flare.
Commenti
