Simple Music Box

I made three different styles of music box covers. Stick the masking tape on the black walnut plywood, sapele plywood, and red oak plywood in the kit and put them into the machine. Import the file into xTool Creative Space for cutting.

Assemble the first type of music box cover. Use glue to stick them onto the base respectively.

Assemble the second type of music box cover. Use glue to stick them onto the base respectively.

Assemble the third type of music box cover. Use glue to stick them onto the base respectively.

Assembly complete.

Note

1. Before using the wood for cutting, you can stick masking tape on its surface to effectively alleviate the adhesion of dust from laser cutting carbonization to the wood during the cutting process. After the wood is cut, simply gently peel off the masking tape. 

2. You can choose to apply a thin layer of wood wax oil on the cleaned black walnut board to enhance the color and texture of the wood. 

3. Using sandpaper can make the seams of the wood smoother, making the installation process smoother.