Black Sprayed 420 Stainless Steel

ME009-01

F2 Ultra UV

F2 Ultra

F2 Ultra (Single)

P2S

M1 Ultra

F1 Ultra

F1 Lite

D1 Pro

D1 Pro 2.0

Laser Power

Processing Mode

Process on baseplate

Processing Type

Score

Zobrazit podrobnosti parametrů ve Studio/XCS

Čas aktualizace parametru: 2026-07-18

Vybráno

makeblock-xtool

Profesionální výsledky · Okamžité nastavení · 30 dní bez rizika

Všechny detaily

Možnost 1

Silver

Black

Množství

Bezpečnostní opatření při zpracování

Clean the material after processing

During processing, this material may generate dust or other substances that remain on the surface. To improve appearance and functionality, clean off carbon residue, slag, or oxide layers using water, alcohol, ultrasonic cleaning, or specialized cleaners.

Use odor protection during processing

Processing materials may release strong odors or fumes. A proper ventilation and exhaust system is required to protect the operator's health and reduce the impact of smoke on processing quality.

Prevent oxidation before and after cutting

This material uses laser-induced oxidation on the surface to achieve black, white, or other color effects. However, in high temperature, high humidity, or when wiped with acidic/alkaline substances, the colors may fade or disappear. In such cases, an oxidation protection paste or spray should be applied to preserve the effect.

Be careful of burns from high heat after processing

This material accumulates heat during processing, making the surface very hot. Let it cool down for a while after processing to avoid burns.

Stay close to the exhaust vent

When processing this material (e.g., with F-series devices), place it near the exhaust fan after proper focusing. This helps with smoke removal, cooling, and camera positioning.