57 Blank Lines, Already Sized and Drilled

Vertical and horizontal bar pendants, heart and envelope necklaces, cuff bracelets, paperclip and tag bracelets, signet rings in brass and 925 silver, geometric earrings, dog paw pendants, chains and jump rings.

The point of a blank is that the hole is already there and the finish is already even. You are buying the part of the job that is tedious rather than creative.

Browse the Metal catalogue

A stainless steel dog tag blank on a ball chain, printed with a celestial tabby cat design by an Atomm maker

Bare Steel Needs Fiber. Anodized and Coated Mark on a Diode.

Almost every blank here is bare stainless, brass or silver, which means a fiber or MOPA source at 1064nm — the beam anneals the surface rather than removing a layer.

Community records back this up: a 1.8mm round stainless dog tag engraved at 200 mm/s and 80% on an F2 Ultra, brass embossed at 900 mm/s on an F1 Ultra. On a diode machine you would need a marking spray first.

See this engraved pendant

A silver evil eye pendant with a Greek key border, engraved on a fiber laser by an Atomm maker

Pick the Piece

Every line is stocked in multiples, because jewelry sells in sets.

Bar and tag pendants

Vertical and horizontal bars, embossed squares, waterdrops. The flat, forgiving place to start — a bar is all engraving surface.

Necklaces and chains

Heart, envelope, locket and camera pendants, plus chains and jump rings sold separately so you can build sets.

Bracelets and cuffs

Cuff, tag and paperclip bracelets. Curved surfaces, so the beam goes out of focus away from the centre line: a rotary attachment turns the piece to keep it in focus, and a jig holds it steady. Engraving shallower does not fix focus on its own — it only limits how much of the curve you try to cover.

Rings and earrings

Brass and 925 silver signet rings, adjustable bands, geometric and waterdrop earrings. The smallest work, and the least forgiving.

Which xTool Machine Is Best for Jewelry Blanks?

Bare metal is a hard gate: fiber or MOPA, or a marking spray first.

xTool F1 Ultra

20W fiber + 20W diode. The entry point for bare stainless, brass and silver. Compact enough for small parts.

xTool F2 Ultra

60W MOPA + 40W diode. Adds colour marking on stainless, and the speed for batch runs of the same pendant.

xTool M2

Diode plus infrared modules. The IR module handles coated and anodized pieces; bare steel still needs fiber.

xTool S1

Enclosed diode, 20W or 40W. Coated and anodized blanks only. For bare steel you would add a marking spray.

Jewelry Metal Settings Recorded by Makers

The machine each job was run on, and the numbers that produced the result.

Brass coin blank

F1 Ultra (Fiber IR 20W) · Emboss Pass 1 · 900 mm/s · 100%

925 Silver

F2 Ultra (Fiber IR 60W) · Emboss Pass 1 · 8000 mm/s · 70%

1.8mm Round Stainless Steel Dog Tag

F2 Ultra (Fiber IR 60W) · Engrave Pass 1 · 200 mm/s · 80%

Why Start From a Tested Setting

The hole is the hard part

Drilling a clean, centred hole in a 1mm pendant is fiddly and easy to ruin. A blank arrives with it done and deburred.

Batch consistency sells

Twenty hand-cut pendants vary; twenty blanks do not. For anything you list for sale, consistent stock is what makes the listing photos match the product.

Bare metal is a laser-type gate

No power setting makes a diode mark bare stainless. Knowing that before you order 50 pendants is the whole point of checking first.

Curved pieces need a plan

Rings and cuffs are not flat. A rotary attachment or a shallower engrave keeps the mark even across the curve.

Explore the Materials Lab

Nine laser material families from the Atomm Materials Lab

All laser materials

Wood, acrylic, leather, metal, glass, stone and the rest — thirteen material families with official settings.

Metal materials

Anodized aluminum, stainless, brass and powder-coated drinkware, with the settings per machine.

Nine tested glass and crystal materials — a K9 crystal ball, inner-carved block, heart keychain, pink K5, frosted glass jars, cobalt glass and an arch crystal with a clock

Glass and K9 crystal

Crystal blanks, glassware and awards — plus why 3D inner engraving needs a UV laser.

Nine laserable leather and PU items — a brown hide swatch, blue patch, bookmark, money clip wallet, watch box, MagSafe wallet, notebooks and a mouse pad

Leather and laserable PU

Top grain cowhide, crazy horse and two-tone PU. Low power and high speed is the rule.

Jewelry Engraving Guides & Ideas

Marking stainless, brass and silver, working around curves, and blank-based ideas that sell.

47 Free Military-Style Dog Tag Pendant & Necklace Ideas

47 free military-style dog tag pendant and necklace designs from the Atomm community — Viking, skull, gothic, and engraved metal dog-tag jewelry made for people, not pets.

2026/07/171006

44 Free Keychain Ideas

44 free keychain designs from the Atomm community — wood, crystal, metal, and leather, organized by category with links to preview, edit, and export each file.

2026/07/181020

48 Free Earring Ideas

48 real laser-cut earring designs from the Atomm community — guitar dangles, sea life, filigree patterns, and character earrings, led by 3,355 views.

2026/07/18859

48 Free Custom Metal Keychain Ideas

48 custom metal keychain ideas from the Atomm community — engraved stainless steel tags, dog tags, anodised aluminium, brass, bottle openers and colour-engraved keyrings.

2026/07/31672

45 Free Ring Engraving Ideas

Discover 45 free ring engraving ideas — engraved metal, wood, and acrylic rings plus ring dishes, holders, and wedding ring boxes to laser cut and personalize.

2026/07/31559

30 Free Metal Business Card Ideas (Stainless & Engraved Designs)

30 metal business card ideas made with a laser: engraved black aluminum, stainless steel, gold UV-printed, QR code, and portrait designs, each with a free project to copy.

2026/08/11413

FAQs

What are engravable jewelry blanks?

Undecorated jewelry components made to be personalised — bar pendants, tags, cuffs, rings and earrings. Most arrive cut and finished, and many are already drilled for a jump ring, but that varies by line, so check the product page for holes, thickness and plating.

Engravable Jewelry Blanks for xTool Machines