Monument Generator
Turn 11 world-famous landmarks into laser-cut 3D models, sized to your sheet, with cut files and a step-by-step assembly manual.
Código do Gerador
monument-generator
4
Descrição
Build the world’s landmarks from flat sheets
Choose a monument, set its size, and get ready-to-cut files for a tab-and-slot 3D model, plus a printable assembly manual. Each one becomes a piece of home decor in natural wood.
11 monuments
- Eiffel Tower
- Big Ben
- Tower Bridge
- Arc de Triomphe
- Palazzo Vecchio
- Parthenon
- Notre-Dame
- Japanese Pagoda
- Himeji Castle
- Chichen Itza
- Mole Antonelliana
Features
- Any size:Set the height or width, and the parts are laid out automatically on your sheet size: 300 × 300, A4, A3, 400 × 400, 600 × 300 or a custom size.
- Monument options: turn details on or off, such as open lattice, railings and engraved decoration.
- Material preview:See the model in plywood, MDF or acrylic, in many finishes.
- 2D and 3D views:check every sheet, and rotate the finished model in 3D.
- Interactive assembly: step through the build in 3D. Each part shows its code, and pointing at a part highlights it.
- Fit test:A small test piece lets you tune the kerf so the tabs fit snugly before you cut the whole kit.
- mm or inches, and the interface in 17 languages.
Make it yours with paint
Every kit cuts from plain wood, and you can paint it however you like.
- Plan it in 3D first: switch the 3D view from Plywood to Painted to see your monument in colour before you cut a single part.
- Choose your colours:Each part group, such as roofs, walls and details, has its own colour, so you can try different looks in seconds.
- Paint by hand:Cut the parts, paint them with the colours you picked, then assemble. The painted preview is your reference while you work.
The kit itself is bare wood. Colours are applied by hand after cutting.
What you get
- One file with all sheets side by side, ready to open in xTool Studio.
- A separate SVG for every sheet, plus the fit test.
- A PDF assembly manual: a parts list for each sheet, then every step illustrated, showing whether parts press-fit or need glue.
Red lines are cut, blue lines are engraved, and every file is 1:1 in millimetres.
How to use it
- Choose a monument and set its size.
- Choose your material and sheet size.
- Cut the fit test first, and adjust the kerf if the tab is loose or tight.
- Export, cut the sheets, and follow the manual step by step.
Material
Designed for 3 mm sheets: plywood, MDF or acrylic.
Coming soon
More monuments are on the way. We’re adding new landmarks to the generator over time, so check back for updates.
Comentários